|
Two Innovative
Solutions Under One Roof
|
Dietrich
TradeReady® Steel Floor Joists and
PolySteel insulating concrete forms
are the perfect compliment in homebuilding. |
 |
|
 |
PolySteel and Dietrich bring together two great innovations that make your project even
better!
+
|
 |
PolySteel is the most recognized name in the
industry and is the oldest ICF
manufacturer currently on the market.
Dietrich is the #1 name in
steel framing - tried and trusted in thousands of commercial building
applications for decades. Take the next big step in
home innovation, combine Dietrich TradeReady®
Steel Floor Joists and PolySteel insulating concrete forms. Dietrich TradeReady®
Steel Floor Joists and PolySteel insulated concrete forms both help
eliminate some of the largest concerns caused by wood - fire, mold,
termites and water damage. Dietrich TradeReady®
Steel Floor Joists are also affordable, durable, environmentally sound
and give consistently higher quality that doesn't warp, twist, sag or
squeak. Dietrich TradeReady®
Steel Floor Joists -
innovation you can build on.
Builders have been
using steel in commercial construction for years. Now,
Dietrich brings the strength of steel to residential building.
Consider a few of steel's many benefits:
Dimensionally stable Environmentally friendly -
100% recycled steel Fire, termite, mold and
corrosion resistant Little fluctuation in price
Dietrich TradeReady®
Steel Floor Joists provide homebuilders with a long-lasting,
easy-to-use alternative to wood. Our joists also provide:
Greater spanning capabilities Pre-spaced joist tabs
eliminate need to layout joists Joists manufactured to exact
length virtually eliminate the need to cut Pre-punched openings provide
easy installation for sub-trades, increase ceiling height and
eliminate the need for soffit framing
|
|
Dietrich TradeReady®
Steel Floor Joists provide greater spanning capabilities than wood floor
joists. The table below shows the spanning capabilities of Dietrich
Steel Floor Joists:
TradeReady® Steel
Floor Joist Allowable Span Table
|
JOIST
MEMBER |
10 psf Dead Load and 40 Live Load |
TL Deflection = L/360, LL Deflection = L/480
Single Span |
|
Spacing (in) o.c. |
| |
12 |
16 |
19.2 |
24 |
| 7.25"
TDJ18 |
14' 8" |
13' 4" |
12' 7" |
11' 8" |
| 7.25"
TDJ16 |
15' 9" |
14' 4" |
13' 6" |
12' 6" |
| 7.25"
TD14 |
16' 11" |
15' 5" |
14' 6" |
13' 5" |
| 8" TDJ18 |
15' 11" |
14' 5" |
13' 7" |
12' 6" |
| 8" TDJ16 |
17' 1" |
15' 6" |
14' 7" |
13' 7" |
| 8" TDJ14 |
18' 4" |
16' 8" |
15' 8" |
14' 7" |
| 9.25"
TDJ18 |
17' 11" |
16' 3" |
15' 2" |
13' 3" |
| 9.25"
TDJ16 |
19' 3" |
17' 6" |
16' 5" |
15' 3" |
| 9.25"
TDJ14 |
20' 8" |
18' 9" |
17' 8" |
16' 5" |
|
11.25"TDJ16 |
22' 7" |
20' 6" |
19' 4" |
17' 11" |
|
11.25"TDJ14 |
24' 4" |
22' 1" |
20' 9" |
19' 3" |
|
11.25"TDJ12 |
27' 1" |
24' 8" |
23' 2" |
21' 6" |
| 10"TDW16 |
20' 11" |
19' 0" |
17' 11" |
16' 7" |
| 10"TDW14 |
22' 6" |
20' 5" |
19' 3" |
17' 10" |
| 10"TDW12 |
25' 2" |
22' 10" |
21' 6" |
19' 11" |
|
12"TDW16 |
24' 4" |
22' 1" |
20' 10" |
19' 4" |
|
12"TDW14 |
26' 2" |
23' 9" |
22' 4" |
20' 9" |
|
12"TDW12 |
29' 3" |
26' 7" |
25' 0" |
23' 2" |
|
14"TDW14 |
29' 9" |
27' 0" |
25' 5" |
23' 7" |
|
14"TDW12 |
33' 3" |
30' 3" |
28' 5" |
26' 5" |
|
General
Notes for Floor Joist Span Table:
|
1. |
Spans are base on continuous lateral
support of the compression flange. |
|
|
|
2. |
Web crippling capacity is based on a
minimum bearing length of 3.5". |
|
|
|
3. |
Recommended bridging is 8'-0" o
center maximum. |
|
|
|
4. |
If an additional point load is locate
at the end bearings web crippling must be checked separately. |
|
|
|
5. |
The joist rim must be installed
according to the installation instructions. Web crippling must
be checked separately. |
|
|
|
6. |
Rim tab must be attached to the hard
side of the joist. |
|
|
|
7. |
Spans are not valid if any portion of
the TradeReady® Rolled Hole falls over a bearing point. |
|
|
|
8. |
TDJ = 1¾" flange, TDW = 2" flange. |
|
|
|
9. |
Fy is 33 ksi for 18 gauge, 50 ksi for
16, 14 and 12 gauge. |
|
For other Dietrich
products including interior load-bearing and non-bearing steel studs,
contact
PolySteel today! |
Adobe®
Acrobat file.
